Yet another PCB layout of the nano SwinSID focusing on aesthetics Nano SwinSID NeatWhat is this repo about?- A kicad implementation of the Swinsid Nano. Based on the nano SwinSID b design by TolaemonAll components are placed on the bottom layer: the goal is to leave the top layer component free and use the silkscreen to mimic the MOS 6581 logo. So, this new layout has aesthetic purposes only.SwinSID - The ICSP header is now optional: Some of the pins on the side have been repurposed to program the ATMega without the need to an additional 2x3 header, which contributes to a cleaner top. The required connections are marked in the PCB- The LED is placed on the top layer, mostly for visibility reasons (in daylight conditions it is easier to spot the led to verify power is reaching the swinsid). However, the led is fully optional allowing the top layer to only have the
Pi1541 is a real-time, cycle exact, Commodore 1541 disk drive emulator that can run on a Raspberry Pi 3B designed by Steve White. This board has been designed using the Steve’s original schematics. The installation is super easy. The PI goes behind the board, plug in into the HAT, put the SDcard with the required software and you are done 🙂This new version goes directly to the IEC connector, no cable is required, the connector is soldered onboard. Also there are the iec signals available in case you want to build a cable for it.This new version includes:Custom Pcb (works with Pi Zero / Pi3)2×20 2.54 connector.3 buttons.Levelshifter onboard.128×64 Oled screen.IEC connector included.All the components are presoldered.Ask for the sd files via email info@arananet.net.This board does not include:Raspberry Pi Zero ZeroW.Micro usb cable required to powerup the PI Zero.More info about the Steve White project, here: https://cbm-pi1541.firebaseapp.comSome good friends help me with the reviews:
Aquí lo tienes:https://www.patreon.com/bmc64?l=esEs un emulador no?,pero para el commodore 64 real.Me parece buena idea.
VIC-II Kawari is my hardware replacement project for the VIC-II (Video Interface Chip II) found in Commodore 64 home computers. In addition to being compatible with the original VIC-II 6567/6569 chips, some extra features will also be available.
parece un reemplazo del chip de video.Me parece exageradamente grande para eso.
Aprovecho, y posteo aqui un link al Sidekick64, que me parece un proyecto que promete mucho:https://github.com/frntc/Sidekick64
Sidekick64 is a versatile cartridge/expansion for the C64, C128, and the C16/+4. Its functionality is entirely defined by software running on a Raspberry Pi 3 (RPi). The connecting circuitry is quite simple and does not include any programmable ICs. Currently implemented features include the emulation ofa GeoRAM/NeoRAM-compatible memory expansion,freezer cartridgesAction Replay 4.x-7.xFinal Cartridge 3(+)Atomic/Nordic Power (experimental)KCS Power CartridgeSuper Snapshot V5numerous bank switching cartridges such asCBM80, C16/+4 and C128 cartridgesEasyflash (with simplified EAPI support)GMod2 (inclduing EEPROM for save games)Prophet64MagicDesk/Domark/HES AustraliaDinamicOcean Type A and B (up to 512k)C64 Game SystemFunplay/Powerplay(Super) ZaxxonComal80Epyx FastloadSimons BasicRGCD and Hucky's cartridgeC64 kernal replacement,Function ROMs on a C128, ormultiple SIDs and Sound Expander/FM emulation (up to 8 SIDs, e.g. to play The Tuneful simplified Datel and Sequential MIDI interface with built-in SoundFont-synthesizer (slightly modified version of TinySoundFont)TED-sound and Digiblaster emulation for C16/+4 (to have all sound devices on one output)But many more things are imaginable, e.g. 80 column cards with HDMI video output, custom accelerators/coprocessors etc.Sidekick64 is a result, or cumulation, of the RasPIC64 project, which is the framework enabling a RPi to bidirectionally communicate on the bus of a Commodore 64/128. Currently, Sidekick64 is set up to work with a Raspberry Pi 3A+ or 3B+ and has only be tested with various PAL-machines (C64 revisions, C128, C128D), C64 NTSC, C16/+4 (PAL, PAL-N, NTSC). To the C16/+4 Sidekick64 is connected using a simple adapter.
Pero lo que no entiendo es porqué está junto con BMC64...¿? si BMC64 ya es todo un emulador en si mismo... no sé, algo se me escapa!