Mostrar Mensajes

Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.


Mensajes - Naibor

Páginas: 1 ... 60 61 [62] 63 64 ... 74
916
No veo la versión del firmware.

917
General / Re:Mi inventario de Commodore 64
« en: Mayo 23, 2017, 20:10:08 »
Pongo aquí unas imágenes del televisor.

918
Bueno pues finalmente he actualizado el firmware así sin anestesia :)

He copiado todos los ficheros de la última versión (18) al raíz del SD2IEC y se ha actualizado perfectamente, ahora tengo la salida:

ErrNr:73
Error:SD2IEC V1.0.0ATENTDEAD0-18
Track:00
Sector:00

Así que todo OK. Muchas gracias de nuevo por vuestra ayuda.

919
Para leer el canal de error con algunos cartuchos hay que teclear DOS" o DOS""

O simplemente teclea este programa.

10 OPEN 1, 8, 15
20 INPUT#1, EN$, ER$, TR$, SC$
30 CLOSE 1
40 PRINT "ErrNr: "; EN$
50 PRINT "Error: "; ER$
60 PRINT "Track: "; TR$
70 PRINT "Sector:"; SC$

Recuerda que la unidad de discos o el SD2IEC tiene que estar recien encendido o reseteado.

Muchas gracias por la información, tengo la siguiente salida:
ErrNr:73
Error:SD2IEC V1.0.0ATENTDEAD0-13
Track:00
Sector:00

¿La versión de firmware es 13?

PD: Señor @Dany Quest  a ver cuando un nuevo Commodore Commodoriano

920
Por aquí tenemos al señor @uctumi que hace virguerías  con el SID, quizás él nos pueda dar su opinión.

921
General / Re:Les presento mi nuevo álbum "HELICOID"
« en: Mayo 23, 2017, 19:17:24 »
Muy bueno, gracias por compartir.

922
General / Re:Monster 6502
« en: Mayo 23, 2017, 15:33:38 »
Menudo trabajazo se han dado... hay gente muy aburrida  :)

923
He leído en algún sitio, que para actualizar el firmware del SD2IEC, puesto que los bin que descargas se componen de varios ficheros, tantos como chip diferentes monta cada modelo, con copiar todos los ficheros al raíz de la SD, el propio chip identifica el formato de si firmware y lo actualiza.

¿Esto es así?, porque yo no tengo ni idea de qué chip lleva mi SD2IEC.

924
gracias @marcos64 , no tengo cartucho acelerador ni DOS Wedge.

Cuando dices de leer el canal de error, te refieres a cuando falla la carga de un programa, o en caso de fallo de actualización de la firmware del SD2IEC?

¿Por qué me has preguntado qué versión de firmware tengo, a ti te funciona el Beach Head 2 del SD2IEC Collection, o sólo era por curiosidad?

925
General / Re:REVIEW TOM2 Adaptador USB a Db9 puerto de juegos
« en: Mayo 23, 2017, 14:42:29 »
Podéis contactar con ellos a través de ebay (en el enlace del primer post), o en esta cuenta de correo ebay@retrofun.info que también está en su anuncio de ebay abajo en la información del vendedor. Yo les he escrito por ambos canales, y aún estoy esperando respuesta.

926
Aquí http://www.retrocomputacion.com/e107_plugins/forum/forum_viewtopic.php?101048 hay un hilo en el cual el amigo @josepzin dice que hay que copiar los ficheros del firmware al raíz de la SD, pero tengo las siguientes dudas:

¿Hay que eliminar todos los ficheros de la SD y copiar los binarios del firmware?

¿Puedo saber qué firmware tiene mi SD2IEC?

¿Alguien ha actualizado antes el firmware, hay algún riesgo de convertirlo en un ladrillo?

Creo que esta es la web oficial de firmwares para el SD2IEC https://www.sd2iec.de/ ¿alguien me lo puede confirmar?

Muchas gracias.


927
General / Re:REVIEW TOM2 Adaptador USB a Db9 puerto de juegos
« en: Mayo 23, 2017, 10:16:32 »
Sí eso sería la genial.

928
No lo sé, como puedo saberlo?, y como puedo actualizar el firmware ?

929
General / Re:Mi inventario de Commodore 64
« en: Mayo 22, 2017, 22:37:49 »
Es esta tele: http://www.philips.es/c-p/20PF5121_01/serie-5000-20-pulgada-lcd/caracteristicastecnicas

He puesto que es de 22 pulgadas pero veo que es de 20''

Se ve muy bien, y suena muy bien también. Tiene unos ajustes muy completos y menús muy rápidos e intuitivos. El contraste con los colores negros es muy bueno también.

Si necesitas más información, o quieres que te pase fotos dímelo por favor.



930
General / Re:REVIEW TOM2 Adaptador USB a Db9 puerto de juegos
« en: Mayo 22, 2017, 21:57:37 »
He decidido copiar aquí el manual de instrucciones por si acaso lo quitan de ebay por algún motivo, al menos tenerlo documentado.

He enfatizado en negrita, en el punto 4, los pasos a seguir para configurar el TOM2 para C64

Support most Amiga, Atari ST / Falcon / TT and C=64 / 128 . Easy reconfigurable  (no need to open case just use your mouse - setting stored).

No need to install any drivers, programs on above OS.

Works perfectly with most mouses including wireless, tested on: Workbench , TOS and GEOS.

Hot plug - just plug or swap your favourite device any time.
Use both connected mouse and keyboard on one dongle - mouse to move cursor on your OS and keyboard to play your favourite games.
Configure your favourite buttons for Gamepad / Joystick - up to 10 reconfigurable buttons - including Autofire for button 1 and 2.
Amiga CD32 games supported - play games with up to 7 buttons.

Emulating mouse on Gamepad / Joystick.

Connect most known PSX gamepad to our adapter.

MANUAL INSTRUCTION
1. Purpose of the interface.
2. Installation.
3. Configuration (Amiga, Atari, C64).
4. Use of the interface.
5. Reset to default settings.


 1. PURPOSE OF THE INTERFACE The TOM interface is dedicated for computers like AMIGA, Atari ST, Atari FALCON, Atari TT and C64, it allows connecting such peripherals via the USB as mouse, joystick, pad or a keyboard (including the wireless keyboards) designed for PC-class computers, which do not require installation of additional drivers (HID compatible device). You can connect multiple devices to the adapter with use of a USB dongle (e.g. mouse and keyboard). Commodore 64 mouse is used in 1351 mode. Ways to connect and functionality are described further in the document.

2. INSTALLATION Adapter can be connected, depending on needs, to any given port (mouse or joystick) it should be inserted (plugged into a port) before the power is on. Attention: Connecting the device to an operating computer might cause damage to the computer port. However connecting of USB peripheral is possible while the computer is powered on (Hot-plug mode) and it can be connected and disconnected multiple times. While the device is operating a LED light indicated its status.

3. CONFIGURATION ( AMIGA / ATARI / C64 ) Changing the operating mode is possible only with use of a mouse and is available one second after the computer is turned on. To change the adapter operating mode it is necessary to: - turn the computer on and press (for the time of adapter configuration): • Left mouse button – to set the adapter to Amiga mode • Right mouse button - to set the adapter to Atari/ST/Falcon/TT mode • Middle mouse button – to set the adapter to C64 mode - next you need to press another mouse button quickly until the LED stops flashing: • Right – for Amiga computers - one flash • Left for Atari ST/Falcon/TT computers - two flashes • Left for C64 computers - three flashes - once the operation is finished you need to stop pressing both mouse buttons The whole operation must be performed within few seconds since the computer startup. Later reconfiguration attempts are impossible. Proper device configuration ensures that the settings are saved, therefore the adapted do not require reconfiguration at next startup.

4. USE OF THE INTERFACE Adapter automatically detects the type of the device connected which is signalized by the LED as follows: - LED dimms every 2s. – mouse, - LED dims twice each 2s. – joystick or pad, - LED dims for three times each 2s. – keyboard. If the LED flashed alternately it means, that the device is not connected or it is not supported. MOUSE PC mouse button Function Left Left mouse button Roll (button) Middle mouse button Right Right mouse button KEYBOARD The connected keyboard operates in two modes: - mouse emulation with use of keys, - joystick emulation with use of keys. Attention: Emulation mode for C64 is experimental (some difficulties might occur). Button Function W Move up (both modes) S Move down (both modes) A Move left (both modes) D Ruch w right (both modes) O or < Fire1 or left mouse button in mouse emulation mode P or > Fire2 or right mouse button in mouse emulation mode 9 or K Autofire for Fire 1 button 0 or L Autofire for Fire 2 button 1 Switch to mouse emulation mode (short LED flash) 2 Switch to joystick emulation mode (short LED flash) Once the emulation mode is being chosen it is remembered and set as a default mode at the next startup. MOUSE + KEYBOARD (wireless set) It allows using both devices simultaneously on terms described separately for the mouse and for the keyboard. JOYSTICK / PAD Joysticks and pads operate in modes listed below: - standard joystick for all kinds of computers (Amiga, Atari, C64) - mouse emulation for all kinds of computers (Amiga, Atari, C64) - in CD32 mode (only for Amiga computers), this mode is supported only for games that support this mode. Default configuration : Button (Alternative) Joystick mode Mouse emulation Amiga CD32 games mode 1 (Triangle) Fire 1 Left mouse button Red 2 (Circle) Fire 2 Right mouse button Blue 3 (X) Yellow 4 (Square) Green 5 (L1) << 6 (R1) >> 7 (L2) Autofire for Fire 1 Autofire Red 8 (R2) Autofire for Fire 2 Autofire Blue 9 10 (Select) Start/Pause The alternative buttons description is purely conventional and it might be different from the one present in here. Change in operating mode ( joystick mode / mouse emulation) happens through simultaneous pressing and holding of 9 and 10 buttons on a pad or joystick and further pressing button: - 1 which causes the mouse emulation mode to start, - 2 which causes the joystick mode to start. After pressing the LED will dim and then quickly flash which means that the interface has been configure correctly and you can release all buttons. Attention: those settings are not saved therefore at next computer startup the default mode would be Pad/Joystick. The CD32 mode is automatically detected in joystick mode after a certain game is started. There is an option to re-programme the button settings to adjust the to your needs. To perform it we need press simultaneously pad or joystick buttons as follows: - Button 1 + Button 2 + left direction and hold it for 10s (LED starts flashing quickly) now we have 15s. to programme the buttons of a pad by pressing 10 buttons one after another according to our needs.

5. RESET TO DEFAULT SETTINGS In case of any configuration difficulties we can return to default settings (only with use of a mouse) – we need to press all three buttons for 10 seconds after that time the LED will start flashing quickly and alternately for 3 seconds period, after that the settings are set back to default values.

Páginas: 1 ... 60 61 [62] 63 64 ... 74